Hitachi ZX250 LC-5
| Daily | Weekly | Monthly | |
| Reg | $725 | $2,900 | $9,300 |
| Corp | $600 | $2,500 | $8,300 |
We honor the lowest rate on ALL rentas
Hitachi ZX250 LC-5 highlights
| Machine Dimensions | ZX250LC-5 | |
| A | Overall Length | |
| 2.96 m (9 ft. 9 in.) | 10.35 m (34 ft.) | |
| 3.61 m (11 ft. 10 in.) | 10.41 m (34 ft. 2 in.) | |
| B | Overall Height | |
| 2.96 m (9 ft. 9 in.) | 3.07 m (10 ft. 1 in.) | |
| 3.61 m (11 ft. 10 in.) | 3.14 m (10 ft. 4 in.) | |
| C | Rear-End Length/Swing Radius | 3.14 m (10 ft. 4 in.) |
| D | Distance Between Idler/Sprocket Centerline | 3.84 m (12 ft. 7 in.) |
| E | Undercarriage Length | 4.64 m (15 ft. 3 in.) |
| F | Counterweight Clearance | 1.09 m (3 ft. 7 in.) |
| G | Upperstructure Width | 2.89 m (9 ft. 6 in.) |
| H | Cab Height | 3.01 m (9 ft. 11 in.) |
| I | Track Width w/ Triple Semi-Grouser Shoes | 700 mm (28 in.) |
| 800 mm (32 in.) | ||
| J | Gauge Width | 2.59 m (8 ft. 6 in.) |
| K | Ground Clearance | 0.46 m (18 in.) |
| L | Overall Width w/ Triple Semi-Grouser Shoes | |
| 700 mm (28 in.) | 3.29 m (10 ft. 10 in.) | |
| 800 mm (32 in.) | 3.39 m (11 ft. 3 in.) | |
| Operating Dimensions | |||
| Arm Length | 2.96 m (9 ft. 9 in.) | 3.61 m (11 ft. 10 in.) | |
| Arm Digging Force | |||
| SAE | 129.1 kN (29,021 lb.) | 112.2 kN (25,220 lb.) | |
| ISO | 131 kN (29,450 lb.) | 114 kN (25,628 lb.) | |
| Bucket Digging Force | |||
| SAE | 175.9 kN (39,552 lb.) | 175.9 kN (39,552 lb.) | |
| ISO | 189 kN (42,489 lb.) | 189 kN (42,489 lb.) | |
| A | Maximum Reach | 10.29 m (33 ft. 9 in.) | 10.91 m (35 ft. 10 in.) |
| A’ | Maximum Reach at Ground Level | 10.11 m (33 ft. 2 in.) | 10.75 m (35 ft. 3 in.) |
| B | Maximum Digging Depth | 6.96 m (22 ft. 10 in.) | 7.61 m (25 ft.) |
| B’ | Maximum Digging Depth at 2.44-m | ||
| (8 ft. 0 in.) Flat Bottom | 6.75 m (22 ft. 2 in.) | 7.44 m (24 ft. 5 in.) | |
| C | Maximum Cutting Height | 10.16 m (33 ft. 4 in.) | 10.56 m (34 ft. 8 in.) |
| D | Maximum Dumping Height | 7.20 m (23 ft. 7 in.) | 7.58 m (24 ft. 10 in.) |
| E | Minimum Swing Radius | 3.44 m (11 ft. 3 in.) | 3.43 m (11 ft. 3 in.) |
| F | Maximum Vertical Wall | 6.03 m (19 ft. 9 in.) | 6.74 m (22 ft. 1 in.) |
| G | Tail-Swing Radius | 3.14 m (10 ft. 4 in.) | 3.14 m (10 ft. 4 in.) |
ZX250 LC-5 key benefits
Demolition ready excavator rentals:
Power
Compact:
Visibility:
Low operation noise:
- Larger commercial or residential structure demolition
- Dig up sewage pipes or electrical conduit
- Break up large areas of concrete with the hammer attachment
- Backfill trenches
- Dig trenches
- Prepare grounds for landscaping
- Remove debris from construction sites
- Remove larger trees or stumps
- Load sand and gravel