John Deere 85G highlights

 

Arm Length

1.62 m (5 ft. 4 in.)

Arm Length

2.12 m (6 ft. 11 in.)

Arm Digging Force (ISO) 35.5 kN (7,981 lb.) 30.7 kN (6,902 lb.)
Bucket Digging Force (ISO) 46.6 kN (10,476 lb.) 46.6 kN (10,476 lb.)
A Maximum Reach 7.21 m (23 ft. 8 in.) 7.70 m (25 ft. 3 in.)
A’ Maximum Reach at Ground Level 7.05 m (23 ft. 2 in.) 7.55 m (24 ft. 9 in.)
B Maximum Digging Depth 3.99 m (13 ft. 1 in.) 4.51 m (14 ft. 10 in.)
B’ Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom 3.62 m (11 ft. 11 in.) 4.20 m (13 ft. 9 in.)
C Maximum Cutting Height 6.79 m (22 ft. 3 in.) 7.14 m (23 ft. 5 in.)
D Maximum Dumping Height 4.77 m (15 ft. 8 in.) 5.08 m (16 ft. 8 in.)
E Minimum Swing Radius 2.74 m (9 ft. 0 in.) 2.89 m (9 ft. 6 in.)
F Maximum Vertical Wall 3.47 m (11 ft. 5 in.) 4.05 m (13 ft. 3 in.)
G Tail Swing Radius 1.49 m (4 ft. 11 in.) 1.49 m (4 ft. 11 in.)

 

Arm Length

1.62 m (5 ft. 4 in.)

Arm Length

2.12 m (6 ft. 11 in.)

A Overall Length  6.64 m (21 ft. 9 in.)  6.82 m (22 ft. 5 in.)
B Overall Height    
    With 450-mm (18 in.) Rubber Crawler Pads  2.61 m (8 ft. 7 in.)  
    With Steel Shoes  2.53 m (8 ft. 4 in.)  
C Undercarriage    
   Width With 450-mm (18 in.) Shoes  2.20 m (7 ft. 3 in.)  
   With 600-mm (24 in.) Shoes  2.47 m (8 ft. 1 in.)  
D Rear-End Length/Swing Radius  1.49 m (4 ft. 11 in.)  
E Distance Between Idler/Sprocket Centerline  2.29 m (7 ft. 6 in.)  
F Undercarriage Length  2.92 m (9 ft. 7 in.)  
G Counterweight Clearance 0.72 m (28 in.)  0.72 m (28 in.)  
H Cab Height  2.53 m (8 ft. 4 in.)  
I Ground Clearance  360 mm (14 in.)  
J Upperstructure Width  2.32 m (7 ft. 7 in.)  
K Gauge Width  1.87 m (6 ft. 2 in.)  
L Blade Lift Height  340 mm (13 in.)  
Blade Height  460 mm (18 in.)  
Blade Width    
   With 450-mm (18 in.) Shoes  2200 mm (7 ft. 3 in.)  
   With 600-mm (24 in.) Shoes  2470 mm (8 ft. 1 in.)  
M Blade Cut Below Grade 320 mm (13 in.)  320 mm (13 in.)  
N Blade Lift Angle  26 deg.  
O Track Width    
    With 450-mm (18 in.) Shoes  0.45 m (18 in.)  
    With 600-mm (24 in.) Shoes  0.60 m (24 in.)  

85G key benefits

Demolition ready excavator rentals:

When you rent a John Deere 85G from Rent1, it will come equipped with full cab quarding and a hydraulic thumb.

Power

When you rent a John Deere 85G from Rent1, it will come equipped with full cab quarding and a hydraulic thumb.

Compact:

When you rent a John Deere 85G from Rent1, it will come equipped with full cab quarding and a hydraulic thumb.

Visibility:

When you rent a John Deere 85G from Rent1, it will come equipped with full cab quarding and a hydraulic thumb.

Low operation noise:

When you rent a John Deere 85G from Rent1, it will come equipped with full cab quarding and a hydraulic thumb.

  • Larger commercial or residential structure demolition
  • Dig up sewage pipes or electrical conduit
  • Break up large areas of concrete with the hammer attachment
  • Backfill trenches
  • Dig trenches
  • Prepare grounds for landscaping
  • Remove debris from construction sites
  • Remove larger trees or stumps
  • Load sand and gravel

Thanks!

Error!
Please, try again later.